Toggle navigation
首页
问答
文章
话题
专家
提问
会员
中心
登录
注册
2022应急局金属非
电动机的水平校正一般用水平仪放在转轴上进行。
发布于 2023-04-13 16:16:56
【判断题】
查看更多
关注者
0
被浏览
111
体验AI问答!更聪明、超智能!
一款基于GPT的超级AI助手,可以对话、创作、写文案!
👉 点击使用 - AI智能问答 🔥
xiaozhu
2023-04-13
这家伙很懒,什么也没写!
此回答被采纳为最佳答案,开通VIP会员可查看
1
个回答
默认排序
按发布时间排序
撰写答案
请登录后再发布答案,
点击登录
登录
注册新账号
有人回复时邮件通知我
关于作者
99429899
人各有志,自己的路自己走。
提问
1712
回答
1038
被采纳
965
关注TA
发私信
相关问题
1
It is all too easy with linear circuits, which appear relatively simple when compared with today’s complex logic arrangements, to ignore detailed performance parameters which can drastically reduce the expected performance.
2
Therefore there will be a slight time delay, due to the propagation delay of the flip-flops between the time one flip-flop changes state and the time the next one changes state, i.e., the change of state ripples through the counter, and these counters are therefore called ripple counters.
3
电动机不宜频繁启动,因启动电流大会使电机过热而烧毁。
4
Instead of triggering on each pulse, a phase lock technique examines the relative phase between each oscillator and many of its sync pulses and adjusts oscillator frequency so that the average phase discrepancy is small.
5
By keeping the off state slightly below threshold, the delay between the applied electrical pulse and the resulting optical output pulse is minimized; this delay must indeed not be more than the bit interval so that the optical pulse can accurately reproduce the input signal.
6
If the original signal is well behaved, the local oscillator will need very little information to be able to track, and that information can be obtained by averaging for a long period of time, thereby eliminating noise that could be very large.
7
The third section describes quantization schemes that take account of the characteristics of speech.
8
电动机内部偏轴扫膛以及外部负荷引起的运行阻力大都会导致电动机过负荷。
9
In a properly designed DC amplifier the effect of transistor parameter variation may be practically eliminated if the operating point of each stage is adjusted so that it remains in the linear operation range of the transistor as temperature varies.
10
Stability and repeatability are fundamental attributes of digital circuits, however, and the necessary accuracy can be obtained in a digital version of the modulator by an appropriate choice of word length to represent the signals.
发布
问题
手机
浏览
扫码手机浏览
分享
好友
在线
客服
回到
顶部